Randall,
You can make your own for about $10. Go to you nearest Sears store and buy
the 16 inch Air tool attachment hose.Then go to your favorite auto parts
store and buy an antifoul adapter for spark plugs and the appropriate quick
connect for your hose, along with a roll of teflon thread sealing tape.
Assembly is required. 8^) You just made uour own pressure hose adapter and
can use it with in the next 2 hrs, not wait for the thing to arrive in the
mail after your check or Paypal has done it's thing.
Larry
----- Original Message -----
From: "Randall Young" <ryoung@NAVCOMTECH.COM>
To: "Triumphs" <triumphs@autox.team.net>
Sent: Friday, December 15, 2000 10:49 PM
Subject: Air powered valve holding tool
>
> Hi all :
>
> Someone recently mentioned the benefits of using air pressure to hold the
valves
> shut while you install seals, replace springs, etc.
>
> I just noticed a tool similar to the one I was talking about on eBay :
>
http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=525457918
>
> Randall
|