Hey Alan,
I just finished installing a MOSS oil cooler kit on my 1960 TR3A. It
went in without too much trouble. You have to remove the front apron to
install it right.
Be sure to get the stainless steel braided hoses. If not, you'll have
chafing problems.
My temperature went down and the oil pressure went up noticably on hot
days.
Routing the hoses took some inginuity.
Let me know if you have any specific questions.
Bill Brewer
Tehachapi, CA
----- Original Message -----
From: "Alan Simpson" <Alan@roverworks.com>
To: <triumphs@autox.team.net>
Sent: Monday, November 27, 2000 10:27 AM
Subject: TR3A vintage race
>
> Hello.
> 1) Does anyone have Ken Gallanders at British Frame (Calif.) phone #
handy?
>
> 2) Does any one have experience fitting an oil cooler and a spin on filter
> to a TR3A?
>
> Thank you
> Alan Simpson
> 1937 Riley
> 1962 Healey
> Many land Rovers.
|