Jim, and List:
Never thought I'd be revealing my "A" hole measurements to the world, but
here goes.
I actually measured the badges both my TR4As and the bottom hole for the A
is exactly 1 3/32 inches (center to center) from the hole nearest the 4 in
the TR4 badge. It is also straight to the right of the hole nearest the 4.
The top hole for the A is directly above the bottom hole..I didn't measure
it but you should go by the dimension for your A badge anyhow.
Hope this makes sense and helps.
Bud Rolofson
----- Original Message -----
From: <Ct54531@aol.com>
To: <triumphs@autox.team.net>
Sent: Sunday, November 26, 2000 10:41 AM
Subject: "A"
>
> I have the "TR4" piece/emblem that goes on the boot lid but I didn't have
the
> "A" before. Can someone give me a location for the holes on the "A" in
> relation to the holes on the TR4 piece.
> Thanks.
>
> Jim
> 654A
|