Robert,
That coil is probably the resistor which lowers the current in the field
windings of the
generator. This ought to be VERY replaceable from a similar unit. You simply
have to
make very reliable solder connections.
I would have expected the ammeter to show some charge sometimes, even if
briefly....
What killed the resistor?
-Tony
Message text written by INTERNET:owner-triumphs-digest@autox.team.net
>From: "Robert Burnett" <tsrb@QuixNet.net>
Subject: tr3b voltage reg
does anyone know if the wire wound coil on the underside of the voltage
regulator can be replaced or must i go for a new regulator, this is the
"later' type with the plug on terminals for the tr3. the coil checks as an
open and of course i get no charge on the ammeter . thanks Rob Burnett
tcf2722L<
|