To: | "Crockett, Steve" <steve.crockett@analog.com> |
---|---|
Subject: | RE: Replacing clutch hose on TR3 |
From: | "John Runge" <greentr3@ptd.net> |
Date: | Tue, 29 Aug 2000 16:11:07 -0400charset="iso-8859-1" |
Importance: | Normal |
Steve, While you are down there, do yourself a favor and rebuild the slave cylinder. Not hard to do, not very expensive. It probably needs it. John -----Original Message----- From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net] On Behalf Of Crockett, Steve Sent: Tuesday, August 29, 2000 9:11 AM To: triumphs Subject: Replacing clutch hose on TR3 I need to replace the hydraulic clutch hose on my TR3 - Any advice, hints, help to make the job as simple as possible would be greatly appreciated! |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Repeat request ... get your up too!, Ptegler |
---|---|
Next by Date: | Hazard switch question, Rob Switzer |
Previous by Thread: | Replacing clutch hose on TR3, Crockett, Steve |
Next by Thread: | Re: DOT 5 cleanup/ silicone contaminated paint, Erik Quackenbush |
Indexes: | [Date] [Thread] [Top] [All Lists] |