So I did a compression check and found that only #1 cylinder had any
compression and then
not a great deal. I ended up pulling the head and found that one valve in #2
cylinder was
stuck open, part of the gasket was missing between #3 and #4 cylinders and #4
cylinder had
both valves stuck open.
Something tells me in the mists of time that this may not have been how it left
the
factory
Wasn't cheap at $200...
Ye Gods, Brad - why didn't you ask for jam as well !! All other things
considered, it's
great to know the old lady is now in the land of the living. A brake rebuild
might be a
good idea and it will be interesting to read your later post as to whether you
can notice
a tangible improvement <g>
Good luck
Jonmac
|