David,
That will depend entirely on what is wrong. Things like cluster gears are very
expensive as are the hubs. However, synchro rings
aren't all that bad and if you don't have to replace any of the main gears,
hubs or shafts, you can probably get by for a hundred bucks
or so (US) if you do the work yourself. If you can get several parts tranies,
you might be able to cannibalize them to make one good
one without having to buy new parts. But always replace the seals and bearings
just to be on the safe side!
Joe
"David A. Templeton" wrote:
>
> A quick question, what are peoples experiences on the cost of rebuilding a
> GT6 gearbox or any TR one for that matter. It seems mine looks like it
> needs one. It won't go into second at any speed and when the drain plug was
> pulled little metal shaving were attached to the magnet.
>
> That is the advice I have so far, and it is going for a second opinion
> tonight. The other gears are no problem so far.
>
> Thanks & regards
>
> David A. Templeton
> Open Text Corp.
> Waterloo, ON
> Canada
> WebSite: http://trandmustang.homestead.com
>
> '74 Triumph SpitSix
> '66 Ford Mustang (Wife's)
> '59 Triumph TR3a (Project)
> '99 GMC Safari
> '95 GMC K2500 Sierra
|