WELL PETE, I GOT MY TR6 BACK TONIGHT. I HAD REPLACED ALL OF THE VARIOUS
THINGS WE'VE DISCUSSED THE LAST WEEK AND IT RUNS BEAUTIFULLY SO FAR.
FINALLY THE CLUTCH SHOWS NO TENDANCIES TO STICK.
I DECIDED TO REPLACE THE CLUTCH HOUSING, AND FORK RELEASE (BOTH USED) AS
WELL AS THE THROW BEARING, SLEEVE, FORK PINS, CLUTCH SHAFT, AND VARIOUS
SEALS AND PIN AS YOU SUGGESTED. I WAS ABLE TO GET AN EXTRA STRENGTH FORK
PIN. THE OLD ONE WAS SEVERELY WORN SO THAT MAY HAVE BEEN THE SOURCE OF MY
PROBLEM. THANKS AGAIN, YOUR HELP WAS INVALUABLE...VIRGIL....
|