Lee,
I'm not sure - as far as I know (and I own one) the TR6 PI
choke setup had two cables (as I understand the carb models
did). One goes to the metering unit, and the other goes to
the shaft that controls the airflow through the trumpets.
However, I'm told that you don't need the latter (and in fact
my car doesn't have this cable - it's been cut off), and can
just use the one to the metering unit. I think if you wanted
both cables you could use the front carb cable for the
metering unit as it's longer, and the shorter rear carb cable
for the trumpets - your car is RHD isn't it? - if not, then
intstructions would be vice versa.
Frank Biedermann
69 TR6 PI
Adelaide
AUSTRALIA
> -----Original Message-----
> From: lee.k.janssen@lmco.com [mailto:lee.k.janssen@lmco.com]
> Sent: Thursday, 11 May 2000 0:55
> To: triumphs@autox.team.net
> Subject: PI choke cable
>
>
>
> Does anyone know if the TR6 twin carb choke cable can be used
> with a PI
> setup?
> It looks like the cable to the rear carb would be too short
> to attach to the
> metering unit.
> Thanks in advance
> Lee Janssen
> Denver CO
>
>
>
|