NAPA sells PI fuel line hose...for about $4/foot if I remember
correctly.
Bud
lee.k.janssen@lmco.com wrote:
>
> Any recommendations on what type of fuel line to use to transport the high
> pressure fuel from the trunk to the fuel distributor for a PI system.
> I plan on installing a new line (known to be rust free and clean) and use
> the old line for the fuel return.
> - Jegs has 0.035 aluminum line available in 25 foot lengths anyone have
> experience with it for 100 psi fuel?
> - Another rather bullet proof option is to simply purchase some stainless
> tubing. The nice thing about stainless is that if you have a chaffing
> problem the frame will wear through before the fuel line.
> - A third option is plastic hydraulic tubing but I'm worried about its
> suitability for handling fuel. I've had problems in the past using plastic
> for the wrong application.
> Thanks in advance to everyone who provides input.
> Later
> Lee
|