--part1_4a.4e64b19.2641ac99_boundary
Folks, looking for the collective wisdom on this one. I am sure there are
several wys of doing this that I have not tried. Please answer directly to
him, copy to me. Thanks. Art Kelly
In a message dated 03-May-00 00:01:15 Eastern Daylight Time,
mantella@bellsouth.net writes:
> Hello it is me again I was wondering if you would know of things I
> should check regarding my rear main seal pouring. it is a steady stream
> of oil coming out it and the engine has recently been rebuilt .it has
> now miles on the rebuild but it has set for 4 years since . the main
> bearings seem right . i have already tried that ,and it has not been
> converted to the newer style seal. Any advise would be greatly
> appreciated .
--part1_4a.4e64b19.2641ac99_boundary
Content-Disposition: inline
Return-Path: <mantella@bellsouth.net>
Received: from rly-yc03.mx.aol.com (rly-yc03.mail.aol.com [172.18.149.35]) by
air-yc04.mail.aol.com (v70.20) with ESMTP; Wed, 03 May 2000 00:01:15 -0400
Received: from mail2.mco.bellsouth.net (mail2.mco.bellsouth.net
[205.152.111.14]) by rly-yc03.mx.aol.com (v71.10) with ESMTP; Wed, 03 May 2000
00:00:40 -0400
Received: from bellsouth.net (host-209-214-169-138.sdf.bellsouth.net
[209.214.169.138])
by mail2.mco.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id XAA19649;
Tue, 2 May 2000 23:57:20 -0400 (EDT)
Date: Wed, 03 May 2000 00:06:06 -0400
From: Jeff Smith <mantella@bellsouth.net>
To: ArthurK101@aol.com
Subject: oil leak
Hello it is me again I was wondering if you would know of things I
should check regarding my rear main seal pouring. it is a steady stream
of oil coming out it and the engine has recently been rebuilt .it has
now miles on the rebuild but it has set for 4 years since . the main
bearings seem right . i have already tried that ,and it has not been
converted to the newer style seal. Any advise would be greatly
appreciated . THANKS JEFF SMITH
--part1_4a.4e64b19.2641ac99_boundary--
|