triumphs
[Top] [All Lists]

Re: TR250 Oil Pressure line

To: David Brady <dmb@cisco.com>
Subject: Re: TR250 Oil Pressure line
From: Joe Sholtes IV <joeiv@snet.net>
Date: Wed, 22 Mar 2000 21:23:05 -0500
Cc: TR250 <triumphs@autox.team.net>
References: <38D66318.F27D2184@cisco.com>
Dave,

              After leaving the engine block, the O.P. line curves up-
ward. It crosse over the speedometer cable and hood release cable
at a point above the foremost and rightmost bolthead for the pedal
bracket mounting bolts.  At this piont, there is a "Fir Tree Clamp",
which looks like a hefty bag ty-rap, clamping these pipes and cables.
together.
  After this, the line goes into the bulkhead through a grommet in a
hole just to the right of the speedometer cable entry grommet, and
above and to the left of the steering column.
  As for where it goes and how it gets to the guage after that, good
luck-
it's a jungle under there.
  Need any explanations/elaborations?

                                                               JOE IV
                                                                TR 250
                                                        WALLINGFORD,
CT.USA


<Prev in Thread] Current Thread [Next in Thread>