I am about to put my doors back together and I have a couple of questions for
anyone who can help:
1) The window goes in BEFORE the inner and outer seals, correct?
2) I remember replacing the window regulator once before, and I had a hell of
a time lining up the bottom of the window with the regulator mechanism...is
there some special "happy" way of doing this? I am worried about scratching
the glass, and I remember that there was a whole of juggling the two pieces
last time.
3) As for as the inner and outer seals go, I once tried to replace these as
well (at least the outer ones), and also had a hell of a time because I
couldn't get the clips to fasten...the angle was really wierd because the
window was sitting right there. I have heard about some mythical crooked tool
that is used for this, but I can't find one. I have also heard about some
people making such a tool themselves...do any of you have any insight here??
4) Lastly, I wasn't planning on putting back in that plastic sheet, I think it
is a water protector of some kind, my was pretty ripped to shreds when I took
the door apart anyway...so I figured I didn't need it. Is this a bad idea.
Thanks for all of your help
Jonathan.
|