I've just used some on my engine and plan to do the frame. I used a
degreaser and then a metal prep to clean up the rust and coat the metal to
make
the paint adhere better. I put the POR15 on last Saturday and I noticed
last night
that it comes off pretty readily from the smooth surfaces of the block.
Hopefully it
will cure and stick better. My garage is only about 30 deg most of the time
except
when I am working, so maybe it needs more time. The product data says it
take
about 3 weeks to cure fully. I hope it will stick to the frame, which is
not rusty and pretty
well painted. I don't know if the original paint will come off easily. I
have heard a lot of positive comments from the list about POR15. There is
more info on
the www.POR15.com website.
Jay
74TR6
----- Original Message -----
From: <Triumph4Jeff@aol.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, February 08, 2000 10:04 PM
Subject: Por 15
I'm getting ready to undercoat my car and replace floor pans. I've ordered
por 15 and am ready to use it. Is the stuff as good as they say it is? Has
anyone ever used it before?
What is metal ready and when should I use that? I've read the directions and
its kind of confusing.
Thanks
Jeff
|