triumphs
[Top] [All Lists]

TR3 body tub bracing - finally

To: triumphs@autox.team.net, spitfires@autox.team.net
Subject: TR3 body tub bracing - finally
From: Dan Buettner <danb@thelittlemacshop.com>
Date: Sun, 6 Feb 2000 20:59:16 -0600
The saga of my lost film came to end this afternoon, so I scanned 
some photos and put together a brief description of the project.

Check it out at 
http://www.thelittlemacshop.com/danscars/tr3braces.html if you are 
interested; basically, it's how I used electrical conduit to limit 
body tub flexing while the tub is off the frame.  It was suggested to 
me by a kind person on the Triumph list (but I can't remember just 
who it was).

Dan
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Dan Buettner  -  Des Moines, Iowa  -  mailto:danb@thelittlemacshop.com

1977 Spitfire, FM64159U, now with an O too. Runs & drives, but shakes
like crazy; needs new tires and a steering/suspension rebuild.
http://home.earthlink.net/~nickndan/gmachine/greenmachine.html

1957 TR3, TS15098L. Needs an O. Undergoing frame-off restoration begun 9/99.
http://home.earthlink.net/~nickndan/TR3/TR3.html

1988 Honda Civic 4WD Wagon. Gets me to work and back home again every day.
No home page. (go figure)

<Prev in Thread] Current Thread [Next in Thread>
  • TR3 body tub bracing - finally, Dan Buettner <=