triumphs
[Top] [All Lists]

RE: TR3 Speedo hi-beam bulb holder

To: Art.McEwen@moh.gov.on.ca, triumphs@autox.team.net
Subject: RE: TR3 Speedo hi-beam bulb holder
From: MPRICE@KeystoneSystems.com
Date: Tue, 1 Feb 2000 16:53:56 -0500 charset="iso-8859-1"
Art
If you are looking for bulb holders, I believe that British Wiring in
Illinois has them. Try them at:
(708)481-9050. http://britishwiring.com/

Good Luck
Mark
-----Original Message-----
From: McEwen, Art [mailto:Art.McEwen@moh.gov.on.ca]
Sent: Tuesday, February 01, 2000 3:17 PM
To: 'triumphs@autox.team.net'
Subject: TR3 Speedo hi-beam bulb holder



Hi All,

I've recently finished calibrating my speedometer using Tony Rhodes
excellent guide (url posted before but worth repeating
http://ourworld.compuserve.com/homepages/arhodes/).

Before I put it back in the dash, does anybody know where I can source a
replacement hi-beam holder?  The (brass?) springy thing is broken off on 2
sides and currently requires tape to keep the bulb in place.

Thanks,

Art McEwen
art.mcewen@moh.gov.on.ca

60 TR3A

<Prev in Thread] Current Thread [Next in Thread>