triumphs
[Top] [All Lists]

Re: TR3 engine no. 301435?

Subject: Re: TR3 engine no. 301435?
From: Randall <randallyoung@earthlink.net>
Date: Sun, 23 Jan 2000 02:07:58 -0800
Cc: mga <mga@napanet.net>, triumphs@autox.team.net
References: <Pine.SOL.3.91.1000122222812.14076J-100000@unix2.nysed.gov>
I just checked a spare block, TS58344E (which would be from a 59 TR3A),
and it also has a casting number of 301435, low on the RHS.  

I believe the casting number changed at least once during the TR3 run,
but have no idea when.  Since the blocks are interchangeable, I don't
believe the casting no. changes correspond to anything except the molds
wearing out.

High on the left hand side of the block, there is a raised smooth area,
about 3/4" high by 3" long, with a bolt hole (for the coil mount), and
the engine serial number stamped into it.

Randall


Andrew Mace wrote:
> 
> On Sat, 22 Jan 2000, mga wrote:
> 
> > I am not a TR3 owner (I have a TR8 and other British cars).  I have a TR3
> > engine and transmission that I picked up with some parts.  The ID no. on the
> > side is 301435.  Is that the engine no. or what?  I also have a bare block
> > (sans main bearings) and it has the same no.  Can anyone tell me what year
> > car these are from?  Is it TR3, 3A or what?
> 
> I suspect that is a casting number. It doesn't seem to match any part
> numbers I have found for a TR2/3/4 block. The actual engine "serial" number
> would normally be TSxxxxE, found on the LHS of the block approximately
> where the coil bracket bolts onto the block.
> 
> --Andy
> 
> * * * * * * * * * * * * * * * * * * * * * * *
> * Andrew Mace, President and                *
> *   10/Herald/Vitesse (Sports 6) Consultant *
> * Vintage Triumph Register <www.vtr.org>    *
> * amace@unix2.nysed.gov                     *
> * * * * * * * * * * * * * * * * * * * * * * *

<Prev in Thread] Current Thread [Next in Thread>