John:
TRF book shows that on a 73 TR6, 3 notches for inside bracket, 1 notch for
outer bracket. HOWEVER, you can use any one of 36 different combinations for
the three different brackets in the up or down position to give you the
proper camber that you wish to set up. I believe the stock set up is 1/2
degree negative camber, but you should check that.
Brian Lanoway (Brian_Lanoway@standardaero.ca) has a table that shows relative
cambers derived by using the different bracket combinations to achieve proper
camber on your particular vehicle.
Harvey Cohen
71 TR6
|