Hi Joe and others,
Okay so I made an assumption.
As you may have guessed I have never looked under a rotoflex GT6 in
sufficient depth to know that they used tele shocks not levers.
I therefore assumed that the roto GT6 would use the same set-up as the roto
Vittesse.
Proof ,I believe, of the saying to assume, to make an ASS of u and ME. 8-(
Back to the other subject I have looked under a Vittesse of a friend who has
a set of the adaptor brackets fitted with spax shocks
set pretty darn hard, he has had no cause for complaint about the strength
yet. I will agree that your idea sounds better and stronger
but is it necessary.
Graham
----- Original Message -----
From: Joe Curry <spitlist@gte.net>
To: Graham Stretch <technical-iwnet@lineone.net>
Sent: Thursday, January 13, 2000 7:36 PM
Subject: Re: GT6 Rotoflex Shock mounts
> Graham,
> The conversion is from where the upper shock is mounted rather from
> levers to teles. The GT6 came with telescoping shocks.
>
> There are frame extenders available for this from TSSC (and TriumphTune,
> I've heard) but they ate two pieces and don't offer the strength that I
> hope to achieve with this piece.
>
> Regards,
> Joe
>
> Graham Stretch wrote:
> >
> > Hi all
> > I am not sure but I seem to recall a conversion bracket from levers to
> > tele's that
> > fits to the chassis (frame?) allready exists from a specialist, sorry
can't
> > recall who
> > or where, will try to find out.
>
> --
> "If you can't excel with talent, triumph with effort."
> -- Dave Weinbaum in National Enquirer
>
|