Go the extra mile get an extra !/2 inch drive breaker bar and six point
deep well socket. It fits in the trunk better , works with less effort
and has multiple uses.
Besides you can always use another Big Freeking Wrench
T.R.
Rob C Swift wrote:
>
> Steph,
>
> I found a nice metric 4-way tool that I keep in my car now. Works
>much
> better than the stock wrench. If I recall correctly, the size that fits is
> the 19mm......but I am just working from memory. The point of the message
> is that any of your large auto parts chains should have a metric 4 way for
> about 8 dollars, that is bound to fit your car.
>
> Good luck!
>
> Rob Swift
> '75 TR6
>
> -----Original Message-----
> From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net]On
> Behalf Of Stéphane St-Amant
> Sent: Monday, January 10, 2000 10:54 PM
> To: triumphs@autox.team.net
> Subject: Lug nut wrench for TR6
>
> Hello everyone,
>
> The car (TR6) is now on jack stand. I would like to take the weels off but
> the
> car didn't come with the lug nut wrench. I would like to go shop for one at
> lunch but I don't know what is the size of the head of the lug nuts (forgot
> to check this morning before leaving to work... Dawwww!) Somebody out there
> must know that info.
>
> Note: I want to get a cruciform one but I know that they are available in
> many
> flavors. I just want to get the right one on the first try!
>
> TIA
>
> Steph
> '71 TR6 CC59683L (On jack stands and even more boxes!)
|