Wiper wheel box

[erl@unix.mail.virginia.edu]

You will net to go up under the cowelling from inside the car, and grip
the wheelbox with a pair of vise grips.  You are right, it is pot metal,
and it is likely that the whole thing will need to be replaced. These wear
out with age.  If in good enough condition, you can have a machine shop
make a little sleeve to go into hole.  Make sure you get the little rubber
boots that fit between the wiper connector and the top of the bezel.  This
keeps dirt, etc. out of the hole.


Cheers

James A. Ruffner