Tim,
>I recently removed the gas guage sending unit from my 1980 Spitfire and found
>that the float was about 1/5 filled with gas. I drilled a pin-sized hold and
>drained the gas, but now I don't know exactly what to use to seal it back up.
>I think I remember this coming up some time ago. I believe someone
>recommended a type of epoxy to paint the surface of the float. Can anyone
>help me out here?
I've used a product called Seal-All to seal gaslines, gas fittings, and
such. Should also work on the float.
You also might try melting some plastic into the hole
.....Bob
mailto:bob@nwstar.com
http://www.nwstar.com/~tr6
ftp://ftp.nwstar.com/triumph
|