Crazeecooter@aol.com wrote:
> ...the brake lines feed off the master cylinder into a
> brass piece connected just aft of the wheel well. That brass piece has a
> connection to the wiring harness on the top....it looks as though it is a two
> wire connector...but I only have one lavender wire going into to the plastic
> plug coming from the wiring harness........am I missing a wire..if so were is
> it suppossed to go?
If this is a TR3 then 2 wires connect to the stop lamp switch (the brass piece
that the brake line runs to). However, I don't think either wire is
purple/lavender -- might be 1 green and 1 green w/ purple stripe.
Geo Hahn
59 TR3A
|