Rod,
My 74 had AC from the dealer. Is it possible that they mounted the bracket
on the inner passenger side front fender to clear the AC compressor? The
Moss catalog appears to show it attached to the radiator bracket. Does the
cannister to anti run-on valve hose point towards the front of the car or
towards the interior? It looks like I will need to fill some holes in my
fender.
Kyle.
At 11:02 PM 11/22/99 -0700, you wrote:
>On the '74 it should be on the right side radiator bracket. Mine are not
>handy, but I think the TRF & Moss catalogues show where it attaches. On
>earlier models (don't know yet when they changed) it was on the right
>engine mount.
>Rod.
>
>At 09:49 PM 22/11/99 -0800, you wrote:
>>Rod,
>>
>>74 TR6
>>
>>Kyle.
>>
>>At 10:03 PM 11/22/99 -0700, you wrote:
>>>Kyle,
>>>What year & what car?
>>>Rod. '70 TR6 CC55899L
>>>
>>>At 06:10 PM 22/11/99 -0800, you wrote:
>>>>
>>>>Listers,
>>>>
>>>>Could anyone tell me what the bottom of the carbon
>>>>canaster bracket is bolted to. Mine seems to be bent
>>>>and I can not find any spot to bolt it to. This is
>>>>the bracket that holds the anti-runon valve.
>>>>
>>>>Thanks Kyle
>>>>kkrice@earthlink.net
>>>>
>>>>
>>>
>>>
>>
>>
>
>
|