| To: | Turner & Turner <turner@turner.se> |
|---|---|
| Subject: | Re: External rocker shaft oil feed |
| From: | scott suhring <suhring@lancnews.infi.net> |
| Date: | Wed, 17 Nov 1999 21:54:22 -0500 |
| Cc: | triumph mailing list <triumphs@autox.team.net> |
| Organization: | InfiNet |
| References: | <3832C671.AB9AC5AB@turner.se> |
Adam: I've had no leakage on mine but the one word of advise when installing is do NOT over tighten the bolt! I know. This is a hollow bolt and will snap off very easily. Scott Suhring Elizabethtown, PA '70 TR6 '59 TR3 Turner & Turner wrote: > Hi listers! > > I've bought one of those supplementary rocker shaft oil feed gizmos and > remember that there was discussion over leakage from the head end, and > that there was a solution to this, involving additional washers, I seem > to remember. > > Are there any listers who know/remember the fix? > > TIA > > Adam Turner > '74 TR6 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: friends non LBC, toad |
|---|---|
| Next by Date: | re: paint rear brake drums, Roy |
| Previous by Thread: | Re: External rocker shaft oil feed, Trevor Jordan |
| Next by Thread: | Re: External rocker shaft oil feed, Joseph J Burlein |
| Indexes: | [Date] [Thread] [Top] [All Lists] |