negative camber

["John A. Simmons" <jsimmons@intrepid.net>]

I have a recently purchased '71 TR6 and the right front wheel has excessive
negative camber (the left side is fine).  The car has stock shocks,
competion springs from TRF (1" lower than stock springs).  I can't remove
shims to correct the problem because they have already all been removed
before I bought the car.  Will changing to stock height springs correct the
problem, or adding spacers, or do a go to a frame shop for some corrective
bending?

John
Berekely Springs, WV
'71 TR6