Paul :
Can't check my car, as the DCO (me) put the spacers back in wrong
already <g> However, they are supposed to go on the passengers side, to
help the car ride level and handle better with only the driver on
board. (Unlike most cars, where spacers between the axle and spring
raise the car, on a TR3 the spacer will lower the side it's on.)
Randall
59 TR3A daily driver
Paul Schneider wrote:
>
> I removed the rear springs off of my 1960 TR3A. Both springs have the same
> number of leafs, but one has two small steel plates (same thickness as the
> spring) attached where the rear axle assembly attaches to the spring. Of
> course, I didn't pay attention during disassembly which spring went on which
> side. Now that it is time to reassembly, I need help. Could someone take a
> look at their car and tell me which spring goes on which side?
>
> Thanks,
>
> Paul
|