Is the lower front stud (triumph #105359, Moss #112-170) where the oil
filter adaptor mounts to the block anything more than a standard stud? The
reason I ask is that I have replace mine with a solid stud and now have no
oil pressure reading through to the gauge. I seem to have oil pressure per
removal of a galley plug, but the gauge does not register. This would seems
consistent with that stud (where the oil gauge feed line attaches) needing a
"banjo" type stud, but I don't recall removing one from there and the
catalogs make it look like a standard, generic solid stud.
TIA
Ken Gano
|