Go to your local auto parts store and ask for seam sealer. It's available in
caulk squeeze tube or brush on form.
Jim wrote:
> Folks,
> I'm deep in the throes of scraping the crap out of the 'boot' of our
> MkII. I'm going to have the floor replaced with one from SpitBits when
> I take the body to the welders to have the left floor pan replaced.
> To the question:
> There is a material at some of the metal joints in the boot and in the
> floor area of the interior which is a rubber like stuff. It scrapes off
> and is VERY tenacious.
> What does one use in place of it prior to painting and where does one
> aquire such stuff?
> Thanks for the replies.
>
> Jim
>
> --
> Rawchester, Neu Yawk
> Sptifire MkII FC68436L Red, what else?
--
George Richardson
The Wyvern - '57 TR3, TS15559L - http://www.merlingroupinc.com/tr3.htm
The Hippogrif - '71 Stag MKI, LE8176E - soon to get a site of it's own
|