triumphs
[Top] [All Lists]

Re: FW: Rehanging Doors

To: bdstinocher@sewsus.com
Subject: Re: FW: Rehanging Doors
From: MRobe33243@aol.com
Date: Tue, 29 Jun 1999 15:41:29 EDT
Cc: triumphs@autox.team.net
Bryan:
  
Did you replace the floors and/or sills and rocker panels?  If so, in doing 
this, the A and B posts must be braced with steel rails across the top of the 
posts and diagonally down the inside of the doorway from A to B post to 
prevent sagging.  If you have not replaced  the above, I suspect you may have 
to use shims at the hinges to bring the door backinto alignment.  Hope this 
helps..

Bob Roberts
TR$ 35411CT 

<Prev in Thread] Current Thread [Next in Thread>