we used to wire in motorcycle buzzers, but if you don;t want that, it also
depends where you fit the thing, make sure there is nothing between the unit
and the metal, it'll magnify the effect. mercedes will obviously have used a
bosch unit, but I doubt that you will hear that anyway.
> ----------
> From: kehrlich@dyax.com[SMTP:kehrlich@dyax.com]
> Reply To: kehrlich@dyax.com
> Sent: Wednesday, May 26, 1999 4:07 PM
> To: triumphs@autox.team.net
> Subject: TR6 turn signal flashers
>
>
> Hi Listers-
>
> Yesterday I replaced the aftermarket turn signal flasher unit with
> another off-the -shelf generic replacement with the hopes it would click
> more loudly since I can't see the flashing light in the dash with the
> top down. No luck.
>
> Does anyone know the electrical specs I should look for in a flasher
> unit that could be swapped in? I ask, because to get the volume level, I
> think I will need a flasher out of a truck, or Mercedes or the like to
> get a good and audible click and these might opr might not not be
> compatible.
>
> Any ideas would be much appreciated.
>
> TIA
>
> Keith Ehrlich
> 74 TR6
>
|