If it's the same as a TR3, you can remove the six nuts that hold the
extension and pulley to the hub, and remove the extension (and the big
bolt) while leaving the hub and pulley halves on the crank. That should
leave room for a puller between the hub and radiator, but I've never
needed one.
Randall
sanborn@net1plus.com wrote:
>
> > Also, it looks like if I only remove the fan and not
> the hub
> >extension, I might possibly be able to get it off without
> removing the
> >radiator.
>
> John,
>
> If you figure out how to get the pulley off without pulling
> the radiator.... your a better man than I. I had to use a
> big pulley puller that is icompatible with the radiator
> being there
>
> Brian Sanborn
> 62 TR4 CT16260L Groton,MA
> sanborn@net1plus.com
>
> ------------------------
|