triumphs
[Top] [All Lists]

Re: melted O/D wiring! TR3A

To: Art.McEwen@moh.gov.on.ca
Subject: Re: melted O/D wiring! TR3A
From: KTRIUMPH@aol.com
Date: Wed, 31 Mar 1999 20:57:27 EST
Cc: triumphs@autox.team.net
In a message dated 99-03-30 10:27:29 EST, you write:

<< Which wire connector on the relay should the solenoid be connected to?
I've
 got it on the back row (against the fire wall) on the left most (drivers
 side) post.
 
 Thanks,
 
 Art McEwen
 TS64989LO
 
 art.mcewen@moh.gov.on.ca
  >>
Art
There are labels on the relay connectors. The solenoid lead goes to "C2",
according to the manual. I would definitely disconnect it if you suspect the
connection, until it can be fixed. If the solenoid is engaged and you go in
reverse, the OD becomes slag. Not to mention the fire danger.

Ken Nuelle
58 TR3A
62 TR3B
64 TR4

<Prev in Thread] Current Thread [Next in Thread>