Hi,
I bought a ClikAdjust some years ago. I presume this is what you're referring
to?
Anyway, it did come with a chart of 'clicks' per thou adjustment but this was
covered with a label that said the best way now was to determine the number of
clicks by measurement.
Here's how you do it.
Take a feeler gauge (say 25 thou) and insert into the gap between the rocker
arm and the valve stem. Slacken the adjusting nut and tighten down on to the
feeler gauge. If you want a true gap of 10 thou then you count the clicks as
you slacken off the adjuster until you can insert the original (say 25 thou)
PLUS the 10 thou.
That's it.
Andy
>Date: Mon, 8 Mar 1999 20:36:42 -0000
>From: "David Hill" <DavHill@email.msn.com>
>Subject: Re. Tappet adjuster
>
>
>Hi, everybody,
>
>This is probably just for the Brits but you never know...
>
>I just bought an SPQR tappet adjuster, without the accompanying instruction
>card. Does anyone know the number of clicks required for the Triiumph Six?
>If anyone has the card from one of these, I would be extremely grateful if
>they could scan the car/no. of clicks table and send it as a jpg.
>
>Thanks,
>
>Dave Hill
>
>PS I know you can figure out the number of clicks by measurement but I'm not
>certain of the procedure.
|