Listers,
I'm in the process of rebuilding the rack and pinion unit from my TR4. I've
been able to remove everything with the exception of the pinion and the
upper bushing. There is a lot of slop between the upper bushing and the
pinion shaft so I definitely need to remove and replace the upper bushing.
I had no problems removing the circlip. Both books that I've read just say
to pull the pinion shaft out. I can safely say that this one won't JUST pull
out!
Any suggestions on how to remove the pinion shaft without damaging
anything in the process?
TIA
Brad (Lincoln Nebraska 402-464-1502)
My Web Site Http://www.141.com/triumphs (updated 12/3/98)
1964 Spitfire4 BFC25720L -- 1973 Spitfire 1500 FM3353U
1962 TR4 CT288L -- 1965 TR4 CT38888LO parts car?
1959 TR3A TS41311L -- 1959 TR3A TS53523L parts car
1951 Dodge Truck B-3-B-108
|