Veneer for TR6 fascia

[Bandre Frank Contractor AMC/SCP <Frank.Bandre@scott.af.mil>]

Thanks to all who replied to my question about finishing the wood fascia.
After removing the old varnish, it was apparent that the veneer needed to be
replace.  Found a carpentry shop that makes cabinets as a good source.
Wound up getting cheery veneer for $1.90 per square foot.  Total for the
front of the fascia and the rear of the cubby door was less than $12.00, tax
included.  If you are looking for veneer, be sure to try local
carpentry/cabinet shops.

Frank
'76TR6 CF57005U