On Mon, 28 Dec 1998, Jack Brooks wrote:
> ...Are there any known errors beyond the TR2-3A piston ring gap
> dimension?
>
> The above mentioned error is the piston ring end gap for the TR2,3,3A which
> is incorrectly listed at 0.003 to 0.0010 whereas the TR4 gaps is 0.010 to
> 0.030. The correct TR2-3A numbers are closer to 0.009 to 0.028, the values
> supplied by Deves, the ring supplier for Moss.
If that range IS in error, then it's an error carried over from the
factory's own Service Instruction Manual, p/n 502602.
--Andy
* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and *
* 10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org> *
* amace@unix2.nysed.gov *
* * * * * * * * * * * * * * * * * * * * * * *
|