<<I'll add a few cents to this one. Art is right - you have to raise the motor
in a TR4 to install the belt. There is only about 1/2" clearance between the
steering rack and the fan extension, whereas on the TR3 there is lots of room
between the ext. and the steering rod. I can change the belts in my TR3's OK
but have to jack up the motor of the TR4.
Ken Nuelle
58 TR3A
62 TR3B
64 TR4>>
Ken I've never had to do any more than loosen the generator to get the fan
belt off the car. Perhaps your engine is sitting lower than mine or needs new
engine mounting rubbers?
Carl
'64 TR4 since '74
|