At 07:45 AM 9/29/98 EDT, JHHOW@aol.com wrote:
>
>Many thanks all your input. I moved the clevis pin up one hole on the throwout
>arm and so far it seems much better. Had to grind the pin a bit to fit. Now I
>need to test with some hard driving. So thankyou, Uncle Jack. John
>
> Hello John
No one pointed out the most serious problem that could be the
results of the simptoms you described, so I thought I had better speak up.
Take a pry bar to the front of the crank, and see if it will move front to
rear 1/8 inch or so. If it does, pull the oil pan and look for the thrust
washers.
Sam Haynes
TR3 Original Owner
|