I don't think it's that one, Bob, that's the "anti-torque strap, which, if you
trace it further back, you'll see is H-shaped, rather than Y-shaped (part
154168). The one I'm trying to identify, it says in the Moss catalogue (page 30,
part no. 611531, illus. 127), attahces to the steering column bracket.
If you can shed any more light, please let me know.
Adam Turner
'74 TR6
Bob Danielson wrote:
> In looking under the dash last night, there's a "Y" shaped bracket that goes
> to either side of the steering column and mounts to metal dash backing at
> one end. I couldn't make out the other end as it's blocked by the demister
> hose. If this is the bracket you're referring to I can try to get a better
> look at the other end.
> Bob Danielson
> 75 TR6 - status at
> http://pages.cthome.net/BobD
>
> -----Original Message-----
> From: Turner & Turner <turner@turner.se>
> To: list, triumphs <triumphs@autox.team.net>
> Date: Monday, September 21, 1998 1:51 PM
> Subject: TR& mystery dash bracket
>
> >
> >I have a support bracket that goes under the DRIVER'S side of the dash,
> >or on the steering column, but I can't work out exactly where.
> >
> >It's rolled to a near-round section, about 7-8" long with flattened,
> >angled ends, each with an eye for a bolt. It's not the wiring duct that
> >goes under the steering column, but it's about the same size.
> >
> >
> >Can anyone tell me exactly where it should attach at each end?
> >
> >
> >Thanks in advance
> >
> >
> >
> >Adam Turner
> >'74 TR6
> >
|