Thanks to all who responded with suggestions to my speedo calibration
questions. The feeling I got was that it is NOT abnormal for speedos
to be over indicating speed, up to 10%.
What someone did bring up, however, is that the drive gear from the
2000/2.5 trany may be different than that for the '6. Does anyone
have the part numbers for the drive gear and tail shaft for the
2000/2.5 to compare to the numbers for the '6?
My expectation is that they are the same, given that it is essentially
the same transmission in the 4-6, GT6, and 2000/2.5. If I compare the
transmissions for the carb vs. PI '6, BL took up the drive ratio
difference in the speedo calibration. I'm begining to beleive that
recalibration of my speedometer is in order.
Scott Mackay
Austin, TX
|