Speaking of clutch hydraulics...
It looks like I'm going to do a rebuild of the clutch master and slave
on my 3A and I was wondering if it's ok to use one of those hones with
the three stones on the aluminum cylinders? Any advice on how to go
about cleaning up the cylinder bores would be appreciated.
Drew
On Jul 14, 1:24pm, Andrew Mace wrote:
> Subject: Re: Clutch Fluid
>
> I'd guess that either master or slave cylinder might be leaking internally
> -- fluid is able to get past the seals but not leak out. It's a good bet
> that a rebuild of the cylinders would take care of your problem. And yes,
> use the same fluid for the clutch hydraulics as you would for brakes.
>
> --Andy
>
> * * * * * * * * * * * * * * * * * * * * * * *
> * Andrew Mace, President and *
> * 10/Herald/Vitesse (Sports 6) Consultant *
> * Vintage Triumph Register <www.vtr.org> *
> * amace@unix2.nysed.gov *
> * * * * * * * * * * * * * * * * * * * * * * *
>
>
>-- End of excerpt from Andrew Mace
--
Drew Rogge
drew@pixar.com
|