To: | butchl@eudoramail.com |
---|---|
Subject: | Re: Need Info on TR4 Soft top |
From: | MRobe33243@aol.com |
Date: | Wed, 8 Jul 1998 17:22:57 EDT |
Cc: | triumphs@Autox.Team.Net |
Butch: If you will examine the front edge of your top, you should find that the material is folded over and sewn to form a pocket; this pocket is supposed to hold two thin metal blades that are inserted into the pocket from both the right and left. After this is accomplished, folds the flap under and inser the front end under the windscreen moulding in the space provided between the frame and aluminum trim. Hope this is an adequate explanation.... Bob Roberts TR$ 35411CT |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | (TR6)Worn block from excessive crankshaft end float, InnaComa |
---|---|
Next by Date: | FS '64 Spit, vitesse |
Previous by Thread: | Re: Need Info on TR4 Soft top, ArthurK101 |
Next by Thread: | Re: TR3A Low Oil Pressure (long), unicorn7 |
Indexes: | [Date] [Thread] [Top] [All Lists] |