triumphs
[Top] [All Lists]

Re: Eastwood's Spot & Stitch Welder's

To: F Underwood <funder77@ix.netcom.com>
Subject: Re: Eastwood's Spot & Stitch Welder's
From: Paul Nelson <dest@alltel.net>
Date: Thu, 25 Jun 1998 21:55:53 -0400
Cc: triumphs@Autox.Team.Net
References: <1.5.4.32.19980625205028.00687e14@pop.mindspring.com> <3593249D.68F@ix.netcom.com>
F Underwood wrote:
> 
> Hello Bobby,
> 
> > The only spot welder in my Eastwood catalog is a gun that attaches to an 
>arc > welder, it sells for $49.99.
> catalog dated 1/98  with Hot Coat on the cover and back  Eastwood
> pg 30 & 31 for above
> 
>   Where can get the > Miller that you mentioned?
> 
> Eastwood  pg 35
> bottom of the page  $399
> 
> I would check with the Miller dealers- Pye-Barker, Southeast AirGas,etc
> >
> > I have catalogs form Northern, Eastwood, Harbor Freight, Craftsman and TIP,
> > and I can't find the Century 75 amp MIG welder.  They all have 100plus amp
> > welders from Century, Miller, Lincoln, etc.  Where did you get yours?
> 
> NORTHERN  about five years ago- Northern has had the 75 amp from time to
> time  Called the Quick Fix Wire Feed Welder , but yes just about all of
> them are now 90-105 amps, my neighbor just bought the Licoln MIG Pak 10
> at Home Depot (midget & B).
> 
> >
> > Do you know or have opinions about paint guns?
> yeah but it's worth what you are paying for it! 8-)
> 
> I have just bought a HVLP gravity feed Sharpe (used $50)
> I have a siphon Devilbiss MBC
> a Taiwan pressure pot - 2qt with remote gun so I can get behind the
> non-removable dashboard and in all the nooks & crannies
> Badger 30 touch up gun
> 
> I've been shooting the primer (DP 90- PPG epoxy primer) in the drive
> way.
> I intend to paint the car myself as well.
> 
> will use the MBC for primer / sufacer
> HVLP for color coat
> 
> I DON"T KNOW WHAT I AM DOING!- But sure am enjoying it!
> ask a lot of questions and stop by a lot of body shops- someone will
> talk to you about what they are doing
> 
> >> >Cheers,
> > >--
> > >Frank Underwood
> > >59 Ford Consul MKII 'lowline' convertible 205E/A 204E 205730
> > >Carbodies Ltd 5684 - 089
> > >79 Triumph Spitfire 1500 FM97634UO
> > >http://home.aol.com/funder770
> > >Atlanta GA USA (well sort of...)
> > >
        Frank, not meaning to spam, but I work for a construction supply
company
called Aggregate. I rent and sell Miller welders every day, and tommorow
I'll
check into the model your interested in if you like. I'll  send you some
literature if you want.
                                www.aggregate-equipment.com

                                Paul Nelson, 80 Spitfire

<Prev in Thread] Current Thread [Next in Thread>