Thanks Dennis, I think it's a point problem. The screw is there, and
tight, I just forgot to set the points at the right point. I'll work on it
after work today and let you all know.
Jane
>Jane,
>You are right, the points are supposed to open as the rotor turns. If
>you haven't already been deluged with responses about the points not
>opening, consider looking at the little screw that holds the points to
>the distributor base. If that screw is loose or missing, the points
>never open and therefore no spark to the plugs.
>
>Good luck.
>Dennis
>75 SPIT
>Omaha, NE
|