Re: TR 3 Clutch

[Malcolm Walker <walker05@camosun.bc.ca>]

On Wed, 3 Jun 1998 MKatzHOPE@aol.com wrote:

> To make a looooong story short...I have now replaced the clutch as well as the
> master cylinder and rod and a transmission seal. Don't know if the original
> clutch was worn but, that's history. Now the new clutch needs to be pumped in
> order to work, it does not disengage completely either.
> Could it need to be bleed ???????

It need to be bled.

Bleed it and see if you get improvement.  You may also have to adjust the
slave pushrod.

-Malcolm