Sam-
Take a look at the back of the block at the top left side. At the level of
the valve cover gasket is a flat spot with the engine number. If it starts
with a KC you have a 2 liter GT6 block; a CC means it's a 2.5 TR6.
A TR6 pan won't fit without modification to clear the steering rack, but a GT6
pan can be dimpled just enough to clear the front crank throws on a 2.5.
What carbs are do you have? The stock TR6 1-3/4 Strombergs plus manifold
won't fit under the bonnet without a bump, and I would bet a 2.5 would be a
little starved with GT6 1-1/2 Strombergs.
Larry Bickel
ljbtvr@aol.com
Lancaster, PA
'68 GT6, my sleeping racer
'71 TVR 2500, my street car and sometimes racer
'85 Dodge Van
'83 Chevy S10
'80 Yamaha 650
|