>>>>> "`Gernot" == Gernot Vonhoegen <gernot.vonhoegen@stir.ac.uk> writes:
`Gernot> Talking of windscreens, I ordered a new seal and
`Gernot> upon fitment I discovered that it was not wide
`Gernot> enough to cover the lower corners of the frame. I
`Gernot> am at the moment not in a mood of taking the
`Gernot> screen out again. Can anyone please tell me if
`Gernot> there were different frame assemblys, seals or
`Gernot> did they just send me the wrong seal? The seal
`Gernot> came from Rimmer bros. and the car in question is
`Gernot> a 74 6. CF chassis. no.
I had the same problem with one for my TR-4 that I bought from
TRF. I complained, but was told that it must be a mechanical or
installation problem, as all the seals were the same. I threw
some silicone in there and figured I'd wait until I re-painted
her to fight the battle again. YMMV.
-MM
|