Lex,
You could send them out. But I would recommend doing it yourself. I
think the usual charge is well over $100. The rebuilt kit is about $30
and routinely available. Get the Haynes Z-S manual and away you go!
Three good pieces of advice - 1)Do one at a time,2) clean,clean and
clean each
part, 3) when taking apart portions of a carb, note the
orientation(some parts
can go back the wrong way).
Jeff N.
'72 TR6
At 12:15 PM 4/17/98 -0400, you wrote:
>
>I have been considering rebuilding (or having rebuilt) the Z-S carbs on my
>'74 TR6 for awhile. And now, the interconnecting throttle linkage has
>broken (it was not original - it was rigged up by a PO). So, I was
>wondering what to do. Is there a place where I could send the whole
>assembly (both carbs and linkage) and have it rebuilt correctly? (I'm not
>sure if I want to try this myself). Or does anyone have any suggestions
>for another type of carb? Thanks a lot.
>Lex Garey, (semi-stranded in) Shelby, NC, '74 TR6
>
>
Jeff C. Nathanson
Director of Product Development
Manufacturing Systems & Technologies, Inc.
|