Mark,
The standard cap is all that is required. Just make sure you align the
sensor properly with the number one plug wire. It is a good idea to
assemble the distributor off the engine and spin the thing to ensure
that you don't have anything binding. This way you won't have to
replace anything if you do.
Joe Curry
On the Mark wrote:
>
> I have an 80 Spit w/Allison electronic ignition. Can I use a std dizzy cap
> or do I need to buy one specific to the Allison ignition system?
>
> Thanks,
>
> Mark
--
"If you can't excel with talent, triumph with effort."
-- Dave Weinbaum in National Enquirer
|